CAREER

# Journals

INTERNATIONAL JOURNALS

I wrote 358 papers and procedures. Click the button below to see more of his papers.


VIEW MORE

INTERNATIONAL JOURNALS



2020


38. Jungsik Choi, Sejin Lee, Inhan kim "Development of Quality Control Requirements for improving the Quality of Architectural Design Based on BIM", Applied Sciences MDPI, vol. pp.1-25 (SCIE)

 

37. Antwi-Afari Maxwell Fordjour, Li Heng*, Anwer Shahnawaz, Yevu Sitsofe Kwame, Wu Zezhou, Antwi-Afari Prince, Kim Inhan, “Quantifying workers' gait patterns to identify safety hazards in construction using a wearable insole pressure system”, SAFETY SCIENCE,ISSN:0925-7535,ELSEVIER,vol.129 (SCIE)

 

36. Inhan kim, Yongha Lee, Choong-Hee Han, Gutaek kim, Jungsik Choi, “Validation of Support for Creation of License Drawings Using Application for openBIM-Based Automatic Generation of 2D Drawings" Applied Sciences MDPI vol.10,pp.1-17 (SCIE)

 

35. EunJung Kim, Inhan Kim, Mi Jeong Kim, “The Impact of Workplace Disability Facilities on Job Retention Wishes among People with Physical Disabilities in South Korea”, Sustainability MDPI,SCIE vol.12,pp.1-13

 

34. Juan Jin, Kyung-Eun Hwang, Inhan Kim, "A Study on the Constructivism Learning Method for BIM/IPD Collaboration Education", Applied Sciences,ISSN:2076-3417 vol.10/15 (SCIE)

 

33. Yongha Lee, Inhan Kim, Jungsik Choi, "Development of BIM-based Risk Rating Estimation Automation and a Design-for-Safety Review System", Applied Sciences, MDPI, (SCIE)

 

32. Jaeyeol Song, Jin-Kook Lee, Jungsik Choi, Inhan Kim, “Deep learning-based extraction of predicateargument structure (PAS) in building design rule sentences”, JCDE(Journal of Computational Design and Engineering), vol.7(0) pp.1-14 (SCIE) 


31.Jun Kwon Hwang, Patrick Nzivugira Duhirwe, Geun Young Yun, Sukho Lee, Hyeongjoon Seo, Inhan Kim, Mat Santamouris,

“A Novel Hybrid Deep Neural Network Model to Predict the Refrigerant Charge Amount of Heat Pumps” Sustainability ISSN:2071-1050 vol.12/7 pp.1-23, (SCIE)

 

30. Inhan Kim, Yongha Lee, Jungsik Choi, "BIM-based Hazard Recognition and Evaluation Methodology for Automating Construction Site Risk Assessment", Applied Sciences MDPI,ISSN:2076-3417, vol.10/7 ,(SCIE)


2019


29. Simhee Hong, Seulki Lee, Inhan Kim, Jungho Yu, "Acceptance Model for Mobile Building Information Modeling (BIM)", Applied Sciences MDPI AG, 9(2019) PP9-18 ISSN: 2076-3417 (SCIE)


28. Jungsik Choi, Inhan Kim, Jihye Shin, “Development of Automated BIM Data Quality Pre-Check(BDQPC) System in Architectural Design Phase” International Journal of Engineering&Technology, Science Publishing Corporation Publisher of International Academic Journals, pp.492-499, ISSN: 2227-524X (SCIE)


2017


27. Jungsik Choi, Inhan Kim, “Development of Rule-based Building Code Compliance Checking System for BIM-based Quality Improvement”, Information – An International Interdisciplinary Journal, 2017 INTERNATIONAL INFORMATION INSTITUTE, pp.2929-2936, ISSN: 1343-4500 (SCOPUS)


26. Jungsik Choi, Inhan Kim, Jongyeon Bae, “Suggestion and Application of an IFC-based Predefined Specification for Improving Interoperability of the Building Code Checking System”, International Journal of u- and e- Service, SERSC Australia, pp.99-110, ISSN: 2005-4246


25. Jaeho Cho, Jaeyoul Chun, Inhan Kim, Jungsik Choi, “Preference Evaluation System for Construction Products Using QFD-TOPSIS Logic by Considering Trade-off Technical Characteristics”, Mathematical Problems in Engineering, Hindawi Publishing Corporation, pp.1-15, ISSN: 1024-123X


24. GeunYoung Yun, Je Hyeon Lee, Inhan Kim, “Dynamic Target High Pressure Control of a VRF System for Heating Energy Savings”, Applied Thermal Engineering, ELSEVIER, pp.1386–1395, ISSN: 1359-4311 ( SCIE)


2016


23. Jungsik Choi, Jihye Shin, Minchan Kim, Inhan Kim, “Development of OpenBIM-based Energy Analysis Software to Improve the Interoperability of Energy Performance Assessment”, Automation in Construction, ELSEVIER, pp.52-64, ISSN: 0926-5805 (SCIE)


22. Hyunsoo Lee, Jinkook Lee, Seokyung Park, Inhan Kim, "Translating Building Legislation into a Computer-Executable Format for Evaluating Building Permit Requirments", Automation in Construction, ELSEVIER, pp.49-61, ISSN: 0926-5805 (SCIE)


21. Hyunjoo Kim, Zhenhua Shen, Inhan Kim, Karam Kim, Annette Stumpf, Jungho Yu, "BIM IFC Information Mapping to Building Energy Analysis (BEA) Model with Manially Extended Material Information", Automation in Construction, ELSEVIER, pp.183-193, ISSN: 0926-5805 (SCIE)


2015


20. Seunghwa Park, Inhan Kim, "BIM-based Quality Control for Safety Issues in the Design and Construction Phases", International Journal of Architectural Research, pp.111-129, ISSN:1938-7806 (SCIE)


19. Jaeho Cho, Jaeyoul Chun, Inhan Kim, Jungsik Choi, "QFD Based Benchmarking Logic Using TOPSIS and Suitability Index", Mathematical Problems in Engineering, pp.1-13, ISSN: 1024-123X (SCIE)


18. Kweonhyoung Lee, Inhan Kim, Seungyeon Choo, "Model Study of Design Components for Energy-performance-based Architectural Design Using BIM LOD 100", Journal of Green Building, pp.179-197, ISSN: 1552-6100


17. Jungsik Choi, Inhan Kim, "Development of an Open BIM-based Legality System for Building Administration Permission Services", Journal of Asian Architecture and Building Engineering, pp.577-584, ISSN: 1346-7581 (SCIE)


16. Jungsik Choi, Hansaem Kim, Inhan Kim, "Open BIM-based Quantity Take-off System for Schematic Estimation of Building Frame in Early Design Stage", Journal of Computational Design and Engineering, pp.16-25, ISSN: 228-4300 (SCIE)


2014


15. Jungsik Choi, Junho Choi, Inhan Kim, "Development of BIM-based Evacuation Regulation Checking System for High-rise and Complex Buildings", Automation in Construction, ELSEVIER, pp.38–49, ISSN: 0926-5805 (SCIE)


14. Kiuhn Ahn, Youngjin Kim, Cheolsoo Park, Inhan Kim, Keonho Lee, "BIM Interface for Full Vs. Semi-automated Building Energy Simulation", Energy and Buildings, ELSEVIER, pp. 671–678,  ISSN: 0378-7788 (SCIE)


2013


13. Inhan Kim, Jongcheol Seo, Insung Kim, "The Role of Construction IT in the Paradigm of Sustainable Architenture", International Journal of Sustainable Building Technology and Urban development, pp.17-21 ISSN 2093-7628 (SCOPUS)


2012


12. Inhan Kim, Jieun Kim, Jongcheol Seo, "Development of an IFC-based IDF Converter for Supporting Energy Performance Assessment in the Early Design Phase", Journal of Asian Architecture and Building Engineering, pp.313-320 ISSN 1346-7581 (SCIE)


2010


11. Byeongho Lee, Geonwon Lee, Inhan Kim, Seunghwa Park, Sungwoo Shin, and Youngho Yeo, “Integrated Assessment System of Sustainable Communities using BIM Technology”, SUSB,International Journal of Sustainble Building Technology and urban Development 2010, Singapore, 2093(2010), pp.64~73, ISSN 2093-761X


2009


10. Jongcheol Seo, Inhan Kim, “Industry Foundation Classes-Based Approach for Managing and Using the Design Model and Planning Information in the Architectural Design”, Journal of Asian architecture and building engineering, Architectural Institute of Japan, 8(2009), pp.431~438, ISSN 1346-7581, (SCIE)


9. Inhan Kim, "BIM, What Does It Mean for Contemporary Architecture", Space Special Issue BIM, pp. 42-47, ISSN: 1228-2472


2008


8. Jungsik Choi, Inhan Kim, “An Approach to Share Architectural Drawing Information and Document Information for Automated Code Checking System”, Tsinghua Science and Technology, 13(2008), pp.171~178, ISSN 1007-0214


7. Inhan Kim, Jongcheol Seo, “Development of IFC Modeling Extension for Supporting Drawing Information  Exchange in the Model-Based Construction Environment”, Journal of Computing in Civil Engineering, ASCE, 22(2008), pp.159~169, ISSN 0887-3801, (SCIE)


2005


6. Inhan Kim, Sun Jung Lee, “Development of an Interoperability Model for Different Construction Drawing Standards Based on ISO 10303 STEP”, Journal of Automation in Construction, Elsevier Publisher, 14(2005), pp.633~649, ISSN 0926-5805


2003


5. Sang Bong Yoo, Inhan Kim, “Application of Active Real-time Objects and Rules in Semantic Web”, DATABASES IN NETWORKED INFORMATION SYSTEMS PROCEEDINGS, SPRINGER-VERLAG BERLIN, 2822(2003), pp.255-269, ISSN: 0302-9743, (SCIE)


4. Kim I, Liebich T, Kim S-S, “Development of a Two Dimensional model space extension for IAI/IFC2.X2nd model”, Electronic Journal of Information Technology in Construction, 8(2003), pp.219~230, ISSN 1400-6529, (SCOPUS)


1999


3. Inhan Kim, Thomas Liebich, "A Data Modeling Framework and Mapping Mechanism to Incorporate Conventional CAD Systems Into an Integrated Design Environment", International Journal of Construction Information Technology, Reprographic Unit, University of Salford, pp.17-33, ISSN: 0968-0365


1997


2. Inhan Kim, Thomas Liebich, Tom Maver, "Managing Design Data in an Integrated CAD Environment: A Product Model Approach", Journal of Automation in Construction, Elsevier publisher, pp.35-53, ISSN: 0926-5805


1995


1. Inhan Kim, Thomas Liebich, Tom Maver, "Representation and Management of Design Information in an Integrated Environment in Architecture", An international Yugoslav Journal of Operations Research, Nov, YU, pp.233-257, ISSN 0354-0243